UPVC Drainage Pipes & Fittings

Strong in every layer.

White, grey, terracotta · Solvent or push-fitLearn more

Get the highlights.

Three colours. Three systems.

White Enhanced, grey Intensified, terracotta orange Heightened.

White, grey and terracotta orange RAKtherm uPVC pipes stacked together

Push-fit seals rated to 70°C.

Triple-sealing-lip ring with DIN lock™.

Terracotta orange uPVC pipe socket with a black sealing ring

Three-layer solid wall. RNP Technology.

A strong three-layer wall in every pipe.

Cutaway of a terracotta orange uPVC pipe socket showing its layered solid wall and sealing ring

Quiet by design.

Noise reduction confirmed to EN 14366 and DIN 4109.

Grey uPVC drainage stack inside an insulated wall beside a quiet home office

RNP Technology

A sandwich of strength.

RAKtherm is the very first manufacturer to unveil RNP Technology. A uniform middle layer built from special cells sits between the inner and outer layers, like a sandwich. The result goes beyond the requirements for noise reduction, durability, flexibility and service life.

RAKtherm uPVC pipes in white, grey and terracotta orange with matching fittings and solvent cements

Outer layer

Solid protection

Middle layer

Special cell structure

Inner layer

Smooth, fast flow

Pipes

uPVC pipes.

Multi-layer uPVC catalogue ›
White RAKtherm Enhanced uPVC pipe

Enhanced pipe

White reinforced PVC-U for underground and aboveground runs.

Solvent joint · 32 to 160 mm

Grey RAKtherm Intensified uPVC pipe

Intensified pipe

Grey reinforced PVC-U for aboveground drainage.

Solvent joint 32 to 200 mm · Push-fit 50 to 160 mm (BS EN 1329)

Terracotta orange RAKtherm Heightened uPVC pipe

Heightened pipe

Terracotta orange reinforced PVC-U for underground drainage.

Solvent joint 32 to 160 mm · Push-fit 50 to 160 mm (BS EN 1401)

Fittings

Fittings that match every colour.

Full fittings list ›
RAKtherm terracotta orange uPVC tee 87.5 degrees
Tee 87.5°Heightened · orange
RAKtherm terracotta orange uPVC double Y branch
Double Y (tee 45°)Heightened · orange
RAKtherm terracotta orange uPVC Y branch 45 degrees
Y (tee 45°)Heightened · orange
RAKtherm terracotta orange uPVC vent cowl
Vent cowlHeightened · orange
RAKtherm grey uPVC bend 87.5 degrees
Bend 87.5°Intensified · grey
RAKtherm grey uPVC bend with access door
Bend 87.5° with access doorIntensified · grey
RAKtherm grey uPVC rain water outlet with grating
Rain water outletIntensified · grey
RAKtherm grey uPVC multi-inlet gully trap
Gully trapIntensified · grey
RAKtherm white uPVC double Y branch
Double Y (tee 45°)Enhanced · white
RAKtherm white uPVC double tee 87.5 degrees
Double tee 87.5°Enhanced · white
RAKtherm white uPVC reducer
ReducerEnhanced · white
RAKtherm white uPVC multi-inlet floor trap
Floor trapEnhanced · white

In use

Built for real buildings.

From villas to high-rise towers, RAKtherm uPVC carries drainage and rainwater every day.

White RAKtherm uPVC drainage pipes and fittings hung under a ceiling with pipe clamps
Terracotta orange RAKtherm uPVC drainage pipes and fittings on a concrete slab
Grey RAKtherm uPVC stack with a branch fixed to an outside wall with clamps
Terracotta orange uPVC pipe sockets with sealing rings fitted
RAKtherm triple-sealing-lip rings

Triple-sealing-lip · DIN lock™

Three lips.
One perfect seal.

DIN lock™ is a combined lip and compression seal, set in the socket at the factory. A flexible thermoplastic elastomer seal is bonded to a polypropylene retaining ring, so it stays in place during transport and assembly.

It needs little force to join, and seals securely across a wide range of pipe-joint tolerances, from minimum to maximum gap.

PVC solvent cement

The bond behind
every joint.

RAKtherm makes its own cleaner and solvent cements to match its grey and orange UPVC systems. The cement softens the surface of pipe and fitting so they fuse into one solid, watertight joint.

RAKtherm PVC Cleaner, PVC Solvent Cement Heavy Bodied Gray 717, PVC Solvent Cement Gray 8001 and CPVC Solvent Cement Heavy Bodied Orange 714 cans

Step 1 · Prepare

PVC Cleaner

Removes dirt, oil and gloss from the pipe end and socket, so the cement bites evenly.

Step 2 · Bond grey systems

Gray 717 & Gray 8001

PVC solvent cements for grey UPVC pipes and fittings. Gray 717 is heavy bodied, for larger diameters.

For CPVC

Orange 714

Heavy-bodied CPVC solvent cement for orange CPVC pipes and fittings.

How to make a solvent joint

  1. Cut the pipe square and remove burrs.
  2. Dry-fit, then mark the socket depth on the pipe.
  3. Clean pipe end and socket with PVC Cleaner.
  4. Brush cement on the pipe end, then the socket.
  5. Push in to the mark with a quarter turn.
  6. Hold for a few seconds and wipe off extra cement.

Always follow the drying and curing times on the can before pressure testing. Flammable: keep away from heat and use in a ventilated area.

Noise reduction

Need it even quieter?

Silent Pro and Ultra Silent Pro are three-layer, mineral-reinforced PP drainage systems, tested to EN 14366, for hotels, hospitals and homes.

Learn more

Tech Specs

Material
Multi-layer reinforced PVC-U
Colours
White (Enhanced), grey (Intensified), terracotta orange (Heightened)
Joint systems
Solvent joint (RAKtherm solvent cement), push-fit
Push-fit seal
Triple-sealing-lip, DIN lock™, up to 70°C
DWV construction
Three layers, solid wall, RNP Technology
Noise testing
EN 14366 and VDI 4100 test conditions
Warranty
15 years
Sizes
White 32 to 160 mm · Grey 32 to 200 mm · Orange 32 to 160 mm (push-fit from 50 mm)
Standards
BS EN 1329 (grey push-fit) · BS EN 1401 (orange)

Downloads

PDFMulti-layer uPVC catalogue PDFPVC brochure (English) PDFCertificates

Explore other systems

Silent Pro & Ultra › PPR › PEX & PE-RT › Reinforced & UV › Gas › Fire-resistant PPR › HDPE › Accessories & Tools › RAKduct ›

Drainage that stays sealed.

Our technical team will match every pipe and fitting to your project.